Selection Steps of Acid and Alkali Resistant Chemical Pumps
Selection steps
1. List the basic data:
1. The characteristics of the medium: medium name, specific gravity, viscosity, corrosiveness, toxicity, etc.
2. The particle diameter and content of the factor contained in the medium.
3. Medium temperature: (70℃)
4. The required flow rate
General industrialacid and alkali resistant pumps can ignore the leakage in the piping system in the process flow, but the impact on the flow rate when the process changes must be considered. If the agricultural acid and alkali resistant pump is used for open channel water delivery, leakage and evaporation must also be considered.
5. Pressure: suction pool pressure, discharge pool pressure, pressure drop in the piping system (head loss).
6. Piping system data (pipe diameter, length, type and number of piping accessories, geometric elevation from suction tank to pressure tank, etc.).
If necessary, the device characteristic curve should also be drawn.
When designing and laying out piping, the following items should be noted:
A. Reasonably choose the pipe diameter, the pipe diameter is large, under the same flow rate, the liquid flow speed is small, the resistance loss is small, but the price is high, and the pipe diameter is small, which will cause the resistance loss to increase sharply, and make the head of the selected acid and alkali resistant pump Increase, increase the power of the belt, and increase the cost and operating expenses. Therefore, it should be considered from the perspective of technology and economy.
B, the discharge pipe and its pipe joints should consider the maximum pressure that it can withstand.
C. The pipeline layout should be as straight as possible, minimize the accessories in the pipeline and minimize the length of the pipeline. When it is necessary to turn, the bending radius of the elbow should be 3 to 5 times the diameter of the pipeline, and the angle should be greater than 90 as much as possible. ℃.
Important Considerations When Pumping Glycol,When pumping glycols, several important factors must be considered to ensure efficient and safe operation. These include:
Fuel Overview: Pumping Fuel,Fuel pumps generally refer to pumps used for liquids primarily employed in transportation, including petrol, diesel, heavy fuel oil, LPG, and kerosene