Polypropylene plastic filter

Update time : 2023-02-14 15:38:31

Technical parameters of polypropylene plastic filter:

1. The filter is cast by polypropylene PP material, with no internal dead Angle, burr, product casting fine, pressure 1.0Mpa.

2. Filter element is filter bag, filtering accuracy can reach 0.5 micron.

3. The general operating temperature of polypropylene plastic filter can reach 80 degrees, and the modified material can reach 150 degrees.

4. The top-in design has many advantages, such as reasonable structure, good sealing, strong circulation ability and simple operation. Especially the filter bag side leakage probability is small, can correctly ensure the filtration accuracy, and can quickly change the filter bag, so that the operation cost is reduced.

5.. The shell, filter screen and filter bag are made of polypropylene. Excellent anti-corrosion effect.

6. Polypropylene plastic filter filter element for filter bag, filter bag material polypropylene PP, polyethylene PE, polyamide (PA, commonly known as nylon), tetrafluoro{PTFE), etc. Filter bag specification is ¢180*810mm.

7. Polypropylene plastic filter connection mode is flange connection, connection standard HG20592-09-PN10-RF.

8. The top cover is leak-proof design, effectively eliminate side leakage, no leakage; The filter bag has a handle design, easy to replace the filter material.

Polypropylene plastic filter is a kind of novel structure, small size, simple and flexible operation, energy saving, high efficiency, airtight work, strong applicability of multi-purpose filter equipment, the filter is supported by plastic mesh bag inside the filter, liquid flow into the inlet, filtered by the filter bag from the outlet, impurities are intercepted in the filter bag. The filter bag can be replaced or cleaned to continue to use. The machine is simple to operate, only need to install the filter bag of required fineness grade in the filter cylinder, check whether the O-ring seal is intact, and then screw the cover, tighten the bolt, you can be put into work.

Application scope of PP plastic filter:

With excellent properties of acid and alkali resistance, it is widely used in the production of pharmaceutical intermediates. Paint, beer, vegetable oil, medicine, chemicals, petroleum products, textile chemicals, photosensitive chemicals, electroplating solution, milk, mineral water, hot solvent, latex, industrial water, sugar water, resin, ink, industrial wastewater, fruit juice, edible structure is reasonable, more stable filtration,

Previous : Structure and principle of corrosion resistant filter

Next : The working principle of bag filter

A Complete Guide to Chemical Pump Selection: Industrial Applications, Core Criteria and Marine-Specific Solutions

Aug .12.2026

This guide outlines professional chemical pump selection criteria covering material compatibility, sealing design, safety compliance, and parameter matching. It introduces applicable pump types, strict marine pump requirements, and reliable customized solutions for diverse industrial corrosive fluid handling scenarios.

Plastic Pumps: Key Advantages, Material Progress and Industrial Applications

Aug .04.2026

Industrial Development of Plastic Pump Technology,Core Advantages of Modern Industrial Plastic Pumps,Advanced Upgrades in Modern Plastic Material Performance

A Complete Guide to Magnetic Drive Pumps

Jul .31.2026

A magnetic drive pump (commonly shortened to mag drive pump) is a high-reliability seal-less centrifugal pump that utilizes magnetic coupling technology to transmit power from the electric motor to the internal impeller.

Overview of Magnetic Drive Pumps: Principles, Advantages, Limitations and Industrial Applications

Jul .17.2026

1. What Is a Magnetic Drive Pump? 2. Core Advantages of Magnetic Drive Pumps 3. Key Disadvantages and Limitations of Magnetic Drive Pumps 4. Industrial Applications of Magnetic Drive Pumps and Optimized Alternatives

Cathy Jack

Cathy

Bruce Lee

Leave a message

Language

Language

Polypropylene plastic filter