Maintenance and maintenance guide of magnetic pump

　　The maintenance and maintenance of magnetic pump is very important, can extend its service life, improve work efficiency, but also can ensure the safety and health of the production environment. The following is the magnetic pump maintenance and maintenance guidelines:

　　Regularly check the sealing performance of the pump, such as sealing ring, shaft seal, etc., find problems in time to replace.

　　Check pump components regularly, such as impeller, bearing, etc., to ensure their normal operation, find problems timely replacement or maintenance.

　　Clean the inside and outside of the pump regularly to remove accumulated dirt and corrosive substances and prevent blockage and corrosion.

　　Replace the filter screen or filter element of the pump regularly to prevent foreign matter from entering the pump and affecting the normal operation of the pump.

　　Check the pump inlet and outlet pipes regularly to ensure that they are unblocked, and clean or repair the problems in time.

　　Replace the lubricating oil or grease of the pump regularly to ensure good lubrication performance.

　　Regularly check the pump motor, such as motor insulation, cable wiring, etc., to ensure its normal operation.

　　Regularly check the magnetic coupler of the pump, such as magnetic rotor, heat insulation, etc., to ensure its normal operation, timely replacement or maintenance of problems found.

　　Regularly record pump operating parameters, such as flow, pressure, speed, etc., in order to timely find problems and repair or replace.

　　Before long-term outage or seasonal outage, the medium in the pump should be emptied and cleaned to ensure the service life of the pump.

　　The maintenance and maintenance of magnetic pump requires certain professional knowledge and experience, so it is recommended to seek professional help for maintenance and maintenance. At the same time, the pump operating manual and related safety specifications should be followed.