4. Adjust the opening of the outlet valve of the chemical resistant pump to the required working condition. If the user is equipped with a flow meter or pressure gauge at the pump outlet, the pump shall operate at the rated point listed in the performance parameter table by adjusting the opening of the outlet valve. If the user is not equipped with a flow meter or pressure gauge at the pump outlet, the opening of the outlet valve shall be adjusted; Measure the motor current of the chemical resistant pump to make the motor run within the rated current. Otherwise, the pump will run under overload (i.e. high current operation until the motor burns out). The opening of the outlet valve adjusted correctly is related to the large and small opening and pipeline working conditions.
The leakage resistance of the shaft seal shall be less than 5 drops when the chemical leakage resistance of the pump is normal.
6. Check the motor of the chemical resistant pump, and the temperature rise at the bearing is ≤ 70. C。
3、 Parking:
1. The high-temperature chemical resistant pump shall be cooled first, and the cooling rate shall be ≤ 10. C / min, reduce the temperature to ≤ 80. C below can stop.
The above is the correct way to use the chemical-resistant pump. If you still don't understand anything, please contact us. DUBAO will serve you wholeheartedly.
Important Considerations When Pumping Glycol,When pumping glycols, several important factors must be considered to ensure efficient and safe operation. These include:
Fuel Overview: Pumping Fuel,Fuel pumps generally refer to pumps used for liquids primarily employed in transportation, including petrol, diesel, heavy fuel oil, LPG, and kerosene