The Solution to the High Pressure of the Electroplating Filter

Views : 1189
Author : Arthur
Update time : 2022-05-18 23:25:38

Why is the pressure of the electroplating filter too high? How to deal with it?

Electroplating Filter

1. The filter element is blocked.

    Solution: First, observe the water output; the higher the pressure, the smaller the water output. Suppose this is the cause; clean or replace the filter element.

2. The lift is too high, and the water outlet resistance is significant.

    Solution: It is a normal phenomenon. The higher the lift, the smaller the flow and the higher the pressure! Use the performance to meet the standard.

3. The pressure gauge is abnormal and cannot be reset to zero, and there is an error in the display.

    Solution: Test the pressure gauge and replace the pressure gauge if it is the cause of the pressure gauge failure.

4. The filter outlet is blocked, and the pressure is high due to no water.

    Solution: Check the outlet pipe and ball valve to see if no water is blocked. Find the problem and replace it.

Choosing a high-quality electroplating filter can often avoid most problems. Welcome to contact us. DUBAO is more than happy to help.
Related News
Read More >>
How to pump Glycol: Glycol Types How to pump Glycol: Glycol Types
Oct .29.2026
Important Considerations When Pumping Glycol,When pumping glycols, several important factors must be considered to ensure efficient and safe operation. These include:
Grease Overview: How to Pump Grease Grease Overview: How to Pump Grease
Oct .29.2026
Pump Options for Grease Transfer Applications,What to Consider When Selecting a Pump for Grease Transfer
Fuel Overview: Pumping Fuel Fuel Overview: Pumping Fuel
Oct .24.2026
Fuel Overview: Pumping Fuel,Fuel pumps generally refer to pumps used for liquids primarily employed in transportation, including petrol, diesel, heavy fuel oil, LPG, and kerosene
Glue Types: How to Pump Glue Glue Types: How to Pump Glue
Oct .23.2026
Glue Types: How to Pump Glue,Pumping glue can be challenging because many adhesives tend to harden and solidify when exposed to air.