Chemical Nickel Filter Does Not Pump Water? 4 Strokes to Help You Solve

Solve the Fault of Chemical Nickel Filter

An electroless nickel filter is chemical equipment used in the electroplating industry to remove insoluble particulate impurities in electroplating liquid. Because of its stable flow, reliable quality, and simple structure, it is used in electroplating, PCB, pharmaceutical, environmental protection, etc., industry use.

The failure rate of the chemical nickel filter is low, so it is rarely necessary to repair it. So what should you do if the chemical nickel filter cannot absorb water?

1. Fill the filter barrel, dosing barrel, pump, and pipeline with water, start the machine, and continue adding water to the dosing barrel. Once the dosing barrel is not filled with water, it will be closed and re-opened. If the dosing bucket is flooded with water, quickly turn off the valve of the dosing bucket.
2. If it is higher than the liquid level, it can be solved by raising the liquid level height and reducing the placement height of the pump or filter.
3. Check whether the bottom or check valve is installed. If not, install it.

The above is the solution to the failure of the chemical nickel filter. If you encounter problems, don't hesitate to contact us.